ES-7036 Rev.0
R80NEIP1
Remote I/O R80 Series
POWER/NETWORK MODULE
(EtherNet/IP)
Functions & Features
• Interchanges analog or discrete I/O signals with the filedbus (EtherNet/IP)
• Space-saving
MODEL: R80NEIP1–R[1]
ORDERING INFORMATION
• Code number: R80NEIP1-R[1]
Specify a code from below for [1].
(e.g. R80NEIP1-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
NEIP1:
EtherNet/IP
POWER INPUT
DC power
R
: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
• PC configurator software (model: R80CFG)
• EDS file
The EDS file and configurator software are downloadable at our web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)
PACKAGE INCLUDES...
• Protective cover
GENERAL SPECIFICATIONS
Connection
•
Power input or excitation supply
: Tension clamp (Front Twin connection)
Stripped length
: 10 mm
•
EtherNet/IP
: RJ-45 modular jack
•
Internal bus or internal power or
excitation
supply
: Via internal bus connector
Housing material
: Flame-resistant resin (gray)
Max. number of I/O modules
: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation
: EtherNet/IP or FE1 to internal bus or internal power or power input to excitation supply
Status indicators
: PWR, MS, NS, LNK1, LNK2
Configurator connection
: USB Mini-B
EtherNet/IP COMMUNICATION
Communication Standard
: IEEE 802.3u
Transmission
: 10BASE-T, 100BASE-TX
Baud rate
: 10/100 Mbps (Auto Negotiation function)
Protocol
: EtherNet/IP
Connection type
: Exclusive owner / Listen only / Input only
Max. number of socket connections
: 3
Transmission media
: 10BASE-T (STP, Category 5), 100BASE-TX (STP, Category 5e)
Network topology
: Line, star and ring
Max. length of fieldbus segment
: 100 meters
IP address
: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary switches, the other items via PC configurator software (model: R80CFG).
DLR supported
Port No
.: 2222, 44818
I/O data size
: 134 Byte / 70 Byte
Status indicator LEDs
: MS, NS (Refer to the instruction manual for details)
INSTALLATION
Power consumption
•
DC
: Approx. 12 W 24 V DC (@ internal power max. current 1.6 A)
Internal power supply (power supply for I/O module)
:
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
•
DC
: 24 V DC ±10 %
•
Operational current:
10 A
(From power and excitation supply connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)
Operating temperature
: -10 to +55°C (14 to 131°F)
Storage temperature
: -20 to +65°C (-4 to +149°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 210 g (0.46 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 500 V AC @ 1 minute
(EthrtNet/IP or FE1 to internal bus or internal power or power input to excitation supply)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
WIRING
• POWER SUPPLY AND EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT
Unit side connector
: MSTBV2,5/5-GF-5,08AU (Phoenix Contact)
Cable side connector
: TFKC2,5/5-STF-5,08AU (Phoenix Contact)
Applicable wire size
: 0.2 − 2.5 mm
2
; stripped length 10 mm
Recommended solderless terminal
• AI0,25−10YE 0.25 mm
2
(Phoenix Contact)
• AI0,34−10TQ 0.34 mm
2
(Phoenix Contact)
• AI0,5−10WH 0.5 mm
2
(Phoenix Contact)
• AI0,75−10GY 0.75 mm
2
(Phoenix Contact)
• AI1−10RD 1.0 mm
2
(Phoenix Contact)
• AI1,5−10BK 1.5 mm
2
(Phoenix Contact)
• AI2,5−10BU 2.5 mm
2
(Phoenix Contact)
EXTERNAL DIMENSIONS unit: mm [inch]
■UNIT
■PROTECTIVE COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.