ES-2433 Rev.2
IT60SW5F
Tower Light Series
WIRELESS TOWER LIGHT
(small size, 60 mm dia., Modbus/TCP (Ethernet), Modbus-RTU transparent 900 MHz band wireless device (parent), 0 - 5 layers)
Functions & Features
• Equipped with 900 MHz band wireless device (parent), which is RS-485 transparent type and enables Modbus-RTU protocol communication
• Converting protocols between 900 MHz band wireless Modbus-RTU (RS-485) and Ethernet Modbus/TCP, with gateway function
• Lighting, blinking and buzzer outputs possible with contact inputs, or with PC via Modbus/TCP
• Wireless device which incorporates a module conforming to FCC part 15 can be used only within the United States
•Non-directional antenna (360°horizontal)
MODEL: IT60SW5F-[1][2][3][4][5][6]D2U-[7][8]
ORDERING INFORMATION
• Code number: IT60SW5F-[1][2][3][4][5][6]D2U-[7][8]
Specify a code from below for each of [1] through [8].
(e.g. IT60SW5F-5RYGBWD2U-R/Q)
• Use Ordering Information Sheet (No. ESU-2375) to select the same color for more than one layer.
• Specify the specification for option code /Q
(e.g. /C01)
[1] LAMP LAYERS
0
: 0 layer (no lamp)
1
: 1 layer
2
: 2 layers
3
: 3 layers
4
: 4 layers
5
: 5 layers
[2] LAMP 1 COLOR
(1st layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 1 - 5)
[3] LAMP 2 COLOR
(2nd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 2 - 5)
[4] LAMP 3 COLOR
(3rd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 3 - 5)
[5] LAMP 4 COLOR
(4th layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 4 - 5)
[6] LAMP 5 COLOR
(5th layer from the top.)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None (not available when Lamp Layers selected are 5)
* Select "None" option for the layers other than the selected.
MOUNTING
D
: Direct mounting
DESIGN TYPE
2
: Type 2
(refer to outline dimensions)
COUNTRY IN WHICH IT IS INTENDED FOR USE
U
: The United States
[7] POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
PoE (Power on Ethernet)
N
: 37 - 57 V DC (PoE: IEEE802.3.af/at approx. 7.5 W)
PoE injector should be supplied by user.
[8] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
RELATED PRODUCTS
For related products of wireless device, refer to our web site.
• LAN cable (model: ITCA)
• Mounting Pole (model: ITPL, ITB, ITP, ITW and ITS)
• Mounting Adapter (model: ITAD1, ITAM, ITAR and ITAW)
Maintenance software
Maintenance console
: MH920 Console International (model: MH920CI) (OKI)
(Maintenance software is downloadable at our web site.)
GENERAL SPECIFICATIONS
Degree of protection
: IP 65, vertical mounting only (bottom connectors excluded)
Connection
• Power: UL1007 AWG20
• Input: UL1007 AWG22
• Ethernet: RJ-45 Modular Jack
•
Wireless communication: SMA coaxial connector
•
Maintenance: Mini USB type B female connector
Housing material
: Flame-resistant resin
Lens
: Flame-resistant resin (transparent)
Isolation
• DC power: Power input to discrete input to Ethernet or FE1 to antenna connector
• PoE: Discrete input to Ethernet (PoE) to antenna connector
DIP SW Setting
: Frequency of lamp blinking and buzzing discontinuance, buzzing volume level, output at connection failed and IP address (refer to the instruction manual)
Lamp
: Red, amber, green, blue and white LEDs
on/blinking (approx. 2 Hz, 10 Hz)
Indicator LED
: Power, Run and PoE (if selected)
For details, refer to the instruction manual.
Buzzing
: Approx. 3.3 kHz
Interval
: continuous/intermittent (approx. 2 Hz, 10 Hz)
COMMUNICATION
■ Common spec.
Modbus protocol
Protocol
: Modbus/TCP
Data
: RTU (Binary)
Port No
.: 502
Max. number of socket connections
: 8
IP address
: 192.168.0.1
(factory setting; can be changed via web browser)
■ Ethernet
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Transmission media: 10BASE-T (STP, Category 5), 100BASE-TX (STP, Category 5e)
Max. length of fieldbus segment: 100 meters
Ethernet indicator LED: Link, Link100
WIRELESS SPECIFICATIONS
Communication Standard
: IEEE 802.15.4g
Frequency
: 900MHz band (902 - 928 MHz)
Max. Transmission power
: 20 mW
Bandwidth
: 400 kHz
Modulation
: GFSK
Baud rate
: Max. 100 kbps
Channels
: 1 to 43 ch
Security
: 128bit AES
Indicator LED
: 920Run, 920Link
Number of child devices
: Max. 100
Protocol
: Modbus-RTU
Communication module
: Coordinator module incorporated
(Oki Electric Industry Co., Ltd. )
Radio parameters setting
: by Web browser
Max. transmission distance (optical):
Approx. 1 km
INPUT SPECIFICATIONS
■
Discrete Input
: Dry contact, open collector NPN
Input resistance
: Approx. 4.4 kΩ
Common
: Negative common NPN
ON level
: ≤ 5 V / ≥ 3.5 mA (Input - COM)
OFF level
: ≥ 18 V DC / ≤ 1 mA (Input - COM)
Input current
: ≤ 5.5 mA per point @ 24 V DC
INSTALLATION
Max. current consumption
•
DC
: Approx. 7.5 W (24 V)
•
PoE
: Approx. 7.5 W
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: Direct mounting
Mounting direction
: Vertical
Weight
: 750 g (1.65 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
DC: 1500 V AC @ 1 minute
(Power input to discrete input to Ethernet or FE1 to antenna connector)
PoE: 1500 V AC @ 1 minute
(Discrete input to Ethernet (PoE) to antenna connector
STANDARDS & APPROVALS
Module conforming to FCC Part 15 incorporated
WEB BROWSER SETTING
EXTERNAL VIEW
MODBUS FUNCTION CODES & SUPPORTED CODES
MODBUS I/O ASSIGNMENT
EXTERNAL DIMENSIONS unit: mm
MOUNTING REQUIREMENTS unit: mm
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
SYSTEM CONFIGURATION EXAMPLES