ES-7035 Rev.1
R80ND2
Remote I/O R80 Series
POWER/NETWORK MODULE
(DeviceNet
®
)
Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
DeviceNet is registered trademark of ODVA.
MODEL: R80ND2–R[1]
ORDERING INFORMATION
• Code number: R80ND2-R[1]
Specify a code from below for [1].
(e.g. R80ND2-R/Q)
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
ND2
: DeviceNet
POWER INPUT
DC power
R
: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
• PC configurator software (model: R80CFG)
• EDS file
The EDS files and configurator software are downloadable at our web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)
PACKAGE INCLUDES...
• Protective cover
GENERAL SPECIFICATIONS
Connection
•
Power input, excitation supply
: Tension clamp (Front Twin connection)
Applicable wire size
: 0.2 - 2.5 mm
2
Stripped length
: 10 mm
•
DeviceNet
: Tension clamp (Front Twin connection)
•
Internal bus or internal power or
excitation
supply
: Via connector
Housing material
: Flame-resistant resin (gray)
Max. number of I/O modules
: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation
: DeviceNet to internal bus or internal power or power input to exc. supply to FE1
Status indicator LED
: PWR, RUN
Configurator connection
: USB Mini-B
DeviceNet COMMUNICATION
Communication/power supply cable
: Approved for DeviceNet
Baud rate setting
: 125 kbps, 250 kbps, 500 kbps, auto-tracking (DIP switch, factory default: auto-tracking)
(Refer to the instruction manual.)
Node address setting
: 0 - 63 (rotary switch, factory default: 00)
(Refer to the instruction manual.)
Status indicator LEDs
: MS, NS
(Refer to the instruction manual for details.)
INSTALLATION
Power consumption
•
DC
: Approx. 12 W 24 V DC (@ internal power max. current 1.6 A)
Internal power supply (power supply for I/O module)
:
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
•
DC
: 24 V DC ±10 %
•
Operational current:
10 A
(From power and excitation supply connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)
Operating temperature
: -10 to +55°C (14 to 131°F)
Storage temperature
: -20 to +65°C (-4 to +149°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: DIN rail
Weight
: 190 g (0.42 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(Internal bus or internal power or power input to exc. supply to DeviceNet to FE1)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
CONNECTION DIAGRAMS
EXTERNAL DIMENSIONS unit: mm [inch]
■UNIT
■PROTECTIVE COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.