ES-9021 Rev.3

R30EBS

Remote I/O R30 Series

INSTALLATION BASE (R3 I/O module extension use)

MODEL: R30EBS[1][2]

ORDERING INFORMATION

• Code number: R30EBS[1][2]
Specify a code from below for each of [1] and [2].
  (e.g. R30EBS08/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] NUMBER OF I/O SLOTS

04: 4 slots
08: 8 slots

[2] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

FUNCTIONS & FEATURES

Installation base to add R3 series I/O modules to R30 modules. Install with R30BS to extend. The type and number of slot of available R3 series I/O module is limited by power supply module and network module. Refer to the specification and instruction manual for each module.

CAUTION

• The internal bus communication period for R3 series I/O modules installed on the R30EBS is as follows.
Internal bus communication period = 6 msec. × number of I/O module + 10 msec. (Data update period of main CPU)
    Example: Four R3 I/O modules
        6 msec. × 4 + 10 msec. = 34 msec.
Even when the R30EBS is mounted to the R30BS, the internal bus communication period of R30 series is kept to approx. 1 msec.

GENERAL SPECIFICATIONS

Capacity:
R30EBS04: I/O module, 4 slots
R30EBS08: I/O module, 8 slots

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
Weight (Without modules mounted)
R30EBS04: approx. 150 g (0.33 lb)
R30EBS08: approx. 280 g (0.62 lb)

PERFORMANCE

Dielectric strength: 1500 V AC @ 1 minute (Internal power or internal bus to FE; isolated on the power supply module)

EXTERNAL VIEW

Use in combination with R30BS. Mount the R3 I/O Modules from the left end (I/O 1) to the right.

EXTERNAL DIMENSIONS unit: mm [inch]

MOUNTING REQUIREMENTS unit: mm [inch]