ES-8065 Rev.4
MD7G
Lightning Surge Protectors for
Electronics Equipment M-RESTER
TERMINAL BLOCK FOR GROUNDING
(ultra-slim)
Functions & Features
• Relaying terminal block in order to connect wires to the DIN rail for grounding
• Used to ground the shield wire or to cross wire the devices protected by the surge protector
MODEL: MD7G-G[1]
ORDERING INFORMATION
• Code number: MD7G-G[1]
Specify a code from below for [1].
(e.g. MD7G-G/Q)
• Specify the specification for option code /Q
(e.g. /C01)
GROUNDING
G
: Grounding
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
RELATED PRODUCTS
•Lightning surge protector for strain gauge (model: MD7LC)
GENERAL SPECIFICATIONS
Construction
: Slim-sized front terminal structure
Degree of protection
: IP20
Connection
: Euro terminal block (torque 0.3 N·m)
Applicable wire size
: 0.2 – 2.5 mm
2
, stripped length 8 mm
Grounding
: DIN Rail
Housing material
: Flame-resistant resin (black)
INSTALLATION
Operating temperature:
-25 to +85°C (-13 to +185°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight
: 70 g (2.5 oz)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
CIRCUIT DIAGRAM