ES-5386 Rev.8
M8XV3
Dual Output Super-mini Signal Conditioners Pico-M Series
SIGNAL CONVERTER
(PC programmable, CE)
Functions & Features
• Converts a DC input into two isolated process signals
• PC programmable
• Space-saving, easy-to-maintain, multi-channel installation base
MODEL: M8XV3-[1][2]-R[3]
ORDERING INFORMATION
• Code number: M8XV3-[1][2]-R[3]
Specify a code from below for each of [1] through [3].
(e.g. M8XV3-S2V2V2-R/Q)
• Input range (e.g. 0 – 5 V DC)
• Output 1 / Output 2 (e.g. 1 – 5 V / 1 – 5 V DC)
If no specifications are specified, model M8XV3-S2V2V2-R/Q will be shipped.
[S2: 1 - 5 V DC, V2V2: 1 - 5 V DC / 1 - 5 V DC]
• Use Ordering Information Sheet (No. ESU-5469) to specify linearization data when the I/O signals are nonlinear. Linear data will be programmed if not otherwise specified.
• Specify the specification for option code /Q
(e.g. /C01)
[1] INPUT
Current
Z1
: Range 0 – 50 mA DC (Input resistance 25 Ω)
Voltage
S1
: Range -1 – +1 V DC (Input resistance 1 MΩ min.)
S2
: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
(Configurator software is used to change input over the described range of the selected suffix code.
For changing between suffix codes, set the Input Range Selector on the side of unit before software adjustment.)
[2] OUTPUT 1 / OUTPUT 2
V2Z1
: Range -10 – +10 V DC / Range 0 – 20 mA DC
V2V2
: Range -10 – +10 V DC / Range -10 – +10 V DC
(Configurator software is used to change output over the described range of the selected suffix code.
For changing between suffix codes, set the Output Range Selector on the side of unit before software adjustment.)
POWER INPUT
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[3] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
RELATED PRODUCTS
• Installation Base or Single Mount Base Socket (model: M8BSx)
This unit must be mounted on dedicated base or socket.
• PC configurator software (model: JXCON)
Downloadable at our web site.
A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types.
GENERAL SPECIFICATIONS
Construction
: Plug-in
Mounting screw
: M3 screw (torque 0.3 N·m)
Housing material
: Flame-resistant resin (black)
Power supply
: Via the Installation Base terminals
(model: M8BSx)
Isolation
: Input to output 1 to output 2 to power
Overrange output
: Approx. -15 to +115 %
Manual zero adjustments
: -5 to +5 %
(factory setting: 0 %)
Manual span adjustments
: 95 to 105 %
(factory setting: 100 %)
Programming
: Downloaded from PC; input range, output range, zero and span, simulating output, lineraization, etc.
Status indicator LED
: Blinking patterns indicate different operating status of the transmitter.
Configurator connection
: 2.5 dia. miniature jack;
RS-232-C level
INPUT SPECIFICATIONS
■
DC Current
: 0 – 50 mA DC;
Input resistor incoporated
(If not specified, the input range is 4 – 20 mA DC.)
Operational range
: 0 – 70 mA DC
Minimum span
: 2 mA
Offset
: Lower range can be any specific value within the input range provided that the minimum span is maintained.
■
DC Voltage
: -10 – +10 V DC
Operational range
: -11.5 – +11.5 V DC
Minimum span
: 10 mV for S1; 100 mV for S2
Offset
: Lower range can be any specific value within the input range provided that the minimum span is maintained.
If not specified, the input range is shown below.
S1: 0 – 100 mV DC
S2: 1 – 5 V DC
OUTPUT SPECIFICATIONS
■ DC Current
: 0 – 20 mA DC
Operational range
: 0 – 24 mA DC
Minimum span
: 1 mA
Offset
: Lower range can be any specific value within the output range provided that the minimum span is maintained.
Load resistance
: Output drive 6 V max.
(e.g. 4 – 20 mA: 300 Ω [6 V ÷ 20 mA])
■
DC Voltage
: -10 – +10 V DC
Operational range
: -11.5 – +11.5 V DC
Minimum span
: 1 V
Offset
: Lower range can be any specific value within the output range provided that the minimum span is maintained.
Load resistance
: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2Z1: 1 – 5 V / 4 – 20 mA DC
V2V2: 1 – 5 V / 1 – 5 V DC
INSTALLATION
Current consumption
: Approx. 50 mA (70 mA for current output)
Operating temperature
: 0 to 55°C (32 to 131°F)
Operating humidity
: 30 to 95 %RH (non-condensing)
Mounting
: Installation Base (model: M8BSx)
Weight
: 70 g (2.5 oz)
PERFORMANCE
Overall accuracy
:
Input accuracy + output accuracy [gain ≤ 1]
(inp. accuracy + out. accuracy) × gain [gain > 1]
Inversely proportional to the span.
Except the accuracy of input resistor.
See CALCULATION EXAMPLES OF OVERALL ACURACY.
• Input accuracy
: (% of max. input range)
-1 – +1 V : ±0.02 %
-10 – +10 V : ±0.01 %
0 – 50 mA : ±0.02 %
• Output accuracy
: (% of output range)
-10 – +10 V: ±0.02 %
0 – 20 mA: ±0.04 %
Temp. coefficient
: ±0.015 %/°C (±0.008 %/°F) of I/O range at 0 to 55°C [32 to 131°F]
Response time
: ≤ 0.9 sec. (0 – 90 %)
Line voltage effect
: ±0.1 % over voltage range
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
:
1500 V AC @1 minute (input to output 1 or output 2 or power to ground)
500 V AC @1 minute (output 1 to output 2 to power)
HOW TO CALCULATE THE ACCURACY
■
Overall Accuracy
[Example] 1 – 5 V input, 1 – 5 V output
Input Accuracy
= Max. Range ÷ Input Span × Input Accuracy
= 20 ÷ 4 × 0.01 = 0.05
Output Accuracy
= Max. Range ÷ Output Span × Output Accuracy
= 20 ÷ 4 × 0.02 = 0.1
Overall Accuracy = 0.05 + 0.1 = ±0.15 %
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEWS
Input Range Selector
(SW POSITION: RANGE)
I / L: Z1 (0 – 50 mA DC)
V / L: S1 (-1 – +1 V DC)
V / H: S2 (-10 – +10 V DC)
Output Range Selector
(SW POSITION: RANGE)
I: V2Z1 (-10 – +10 V / 0 – 20 mA DC)
V: V2V2 (-10 – +10 V / -10 – +10 V DC)
Zero/Span Selector
(SW POSITION: MODE)
S: SPAN
Center: OFF
Z: ZERO
Zero/Span is calibrated by using UP/DOWN switches when the calibration mode is set. Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM