ES-5467 Rev.4
M8BSC-8
Dual Output Super-mini Signal Conditioners Pico-M Series
INSTALLATION BASE (8 positions)
Functions and Features
• Installation Base (8 positions) dedicated for Dual Output Super-mini Signal Conditioners Pico-M
• Saving wiring work within an instrumentation panel
• Power supplied through printed wiring on the base
• Connection: Output 1 with M3.5 screw terminals, Output 2 with connector
MODEL: M8BSC-8U1-[1][2]
ORDERING INFORMATION
• Code number: M8BSC-8U1-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. M8BSC-8U1-KK/Q)
• Specify the specification for option code /Q
(e.g. /C01)
CONNECTION (output 1/output 2)
U1
: Screw terminal block / Fujitsu FCN type connector
[1] POWER SUPPLY UNIT
AC Power
K
: 85 – 132 V AC; single power source
(Operational voltage range 85 – 132 V, 47 – 63 Hz)
KK
: 85 – 132 V AC; two independent power sources
(Operational voltage range 85 – 132 V, 47 – 63 Hz)
L
: 170 – 264 V AC; single power source
(Operational voltage range 170 – 264 V, 47 – 63 Hz)
DC Power
R
: 24 V DC; no power supply unit
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Redundant power supplies are recommended for long time use without interruption.
[2] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
Only solder side of the main PWB is coated.
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
GENERAL SPECIFICATIONS
Capacity
: 8 positions
Connection
Power input
: M3.5 screw terminals (M3 screw terminals for AC power input) (torque 0.8 N·m, 0.5 N·m for AC power input)
Input and output
: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal
: Nickel-plated steel
Isolation
: Input to output 1 to output 2 to power to FG
Power indicator LED
: ON with normal voltage level
INSTALLATION
Power Consumption
•
AC
: 130 VA min.
•
DC
: 0.7 A min.
Operating temperature
: 0 to 55°C (32 to 131°F)
0 to 50°C (32 to 122°F) for AC power
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface
Weight
:
0.8 kg (1.8 lb) for power code K, L
0.9 kg (2.0 lb) for power code KK
0.7 kg (1.5 lb) for power code R
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
:
1500 V AC @1 minute (input to output 1 or output 2 or power to FG)
500 V AC @1 minute (output 1 to output 2 to power)
500 V AC @1 minute (output 1 or output 2 to FG for AC power input)
MOUNTING REQUIREMENTS unit: mm (inch)
CONNECTION DIAGRAM
■ MODEL: M8BSC-8U1 (M3.5 screw terminals / Fujitsu FCN connector)
■ CONNECTION DIAGRAM
EXTERNAL DIMENSIONS unit: mm [inch]
■ M8BSC-8U1-R
■ M8BSC-8U1-K, KK, L