ES-8031 Rev.2

M60EYV

Base-free Interconnecting Ultra-Slim Signal Conditioners M60E Series

ISOLATOR

Functions & Features
• Converts DC input from a sensor into a standard process signal
• Power connector for interconnecting modules and collectively supplying power
• e-CON connector connection for easy wiring
• 6-mm wide ultra-slim design
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
• Power indicator LED

MODEL: M60EYV-[1][2]-R[3]

ORDERING INFORMATION

• Code number: M60EYV-[1][2]-R[3]
Specify a code from below for each of [1] through [3].
  (e.g. M60EYV-4W4W-R/K/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] INPUT / [2] OUTPUT

AA: 4 - 20 mA DC (Input resistance 50 Ω) 
     / 4 - 20 mA DC (Load resistance 550 Ω max.)
A6: 4 - 20 mA DC (Input resistance 50 Ω)
    / 1 - 5 V DC (Load resistance 5000 Ω min.)
6A: 1 – 5 V DC (Input resistance 1 MΩ min.) 
     / 4 - 20 mA DC (Load resistance 550 Ω max.)
66: 1 - 5 V DC (Input resistance 1 MΩ min.)
     / 1 - 5 V DC (Load resistance 5000 Ω min.)
4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)
    / -10 - +10 V DC (Load resistance 20 kΩ min.)

POWER INPUT

DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)
blank: Standard response (≤ 0.5 sec.)
/K: Fast Response (≤ 5 msec.)
Other Options
blank: none
/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection
Input and output: 4-pin e-CON connector
Power input: Via the power connector or the 4-pin e-CON connector
PWB connector (mounted)
Reccomended cable connector: XN2A-1470 (omron)
Applicable wire size: 0.08mm2 (AWG28) to 0.5mm2(AWG20)
Outer sheath diameter: max. 1.5 dia
(The cable connector is not included in the package.
   Refer to the specifications of the product.)
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: -2 to +2 % (front)
(Output code 4W: Adjustable at 0 V.)
Span adjustment: 98 to 102 % (front)
Power indicator LED: Green LED turns on when the power is supplied.

INPUT SPECIFICATIONS

DC Current: Input resistor incorporated

INSTALLATION

Power consumption: Max. 0.6 W
Power input: Max. 3 A (Total current consumed by the interconnected signal conditionerse must be 3 A or less.)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 65 g (2.3 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute  (input to output to power to ground)

STANDARDS & APPROVALS

EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive

EXTERNAL VIEW

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM