ES-2465 Rev.14
M5MS
Super-mini Terminal Block Signal Conditioners M5-UNIT
POTENTIOMETER TRANSMITTER
Functions & Features
• Provides a standard DC output proportional to a potentiometer or slidewire position input
• Constant voltage excitation
• Fast response type available
• High-density mounting
• Power LED
MODEL: M5MS-[1]-[2][3]
ORDERING INFORMATION
• Code number: M5MS-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. M5MS-A-R/K
/Q)
• Special output range (For codes Z, 0 & 01)
• Specify the specification for option code /Q
(e.g. /C01/V01/S01)
INPUT
Total resistance 100 Ω – 10 kΩ
[1] OUTPUT
Current
A
: 4 – 20 mA DC (Load resistance 550 Ω max.)
D
: 0 – 20 mA DC (Load resistance 550 Ω max.)
Z
: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
1
: 0 – 10 mV DC (Load resistance 100 kΩ min.)
(CE or UKCA not available)
2
: 0 – 100 mV DC (Load resistance 100 kΩ min.)
(CE or UKCA not available)
3
: 0 – 1 V DC (Load resistance 100 Ω min.)
4
: 0 – 10 V DC (Load resistance 1000 Ω min.)
5
: 0 – 5 V DC (Load resistance 500 Ω min.)
6
: 1 – 5 V DC (Load resistance 500 Ω min.)
1W
: -10 – +10 mV DC (Load resistance 100 kΩ min.)
(CE or UKCA not available)
2W
: -100 – +100 mV DC (Load resistance 100 kΩ min.)
(CE or UKCA not available)
3W
: -1 – +1 V DC (Load resistance 800 Ω min.)
4W
: -10 – +10 V DC (Load resistance 8000 Ω min.)
5W
: -5 – +5 V DC (Load resistance 4000 Ω min.)
0
: Specify voltage (See OUTPUT SPECIFICATIONS)
01
: Specify voltage (See OUTPUT SPECIFICATIONS)
(CE or UKCA not available)
[2] POWER INPUT
AC Power
M
: 85 – 264 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
(CE or UKCA not available)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[3] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank
: Standard (≤ 0.5 sec.)
/K
: Fast Response (Approx. 25 msec.)
Input Minimum Span
blank
: ≥ 70 % of total resistance
/A1
: ≥ 50 % of total resistance (CE or UKCA not available)
(Selectable only current output A, D)
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
ADJUSTMENT
/V01
: Multi-turn fine adjustment
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Construction
: Terminal block
Connection
: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal
: Nickel-plated steel (standard) or stainless steel
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output to power
Overrange output
: Approx. -10 to +110 % at 1 – 5 V
Zero adjustment
: 0 – 30 % of total resistance (front)
Span adjustment
: 70 – 100 % of total resistance (front)
(For ‘/A1', 50 – 100 % of total resistance (front))
Power indicator LED
: Green LED turns on when the power is supplied.
INPUT SPECIFICATIONS
Minimum span
: 70% of total resistance
(For ‘/A1', 50% of total resistance)
Excitation
: 0.5 V DC
OUTPUT SPECIFICATIONS
■ DC Current
: 0 – 20 mA DC
Minimum span
: 1 mA
Offset
: Max. 1.5 times span
Load resistance
: Output drive 11 V max.
■
DC Voltage
•
Output code 0 (CE)
Voltage range
:
-10 – +10 V DC
Minimum span
: 1 V
Offset
: Max. 1.5 times span
Load resistance
: Output drive 10 mA max.; at ≥1 V
Max. 1.25 mA output drive for negative voltage
•
Output code 01 (Not CE)
Voltage range
: -1 – +1 V DC
Minimum span
: 10 mV
Offset
: Max. 1.5 times span
Load resistance
: Min. 100 kΩ
Min. 1 MΩ for negative voltage
INSTALLATION
Power Consumption
•
AC
:
Approx. 2 VA at 100 V
Approx. 3 VA at 200 V
Approx. 3 VA at 264 V
•
DC
: Approx. 2 W
Operating temperature
: -5 to +55°C (23 to 131°F)
Operating humidity
: 0 to 90 %RH (non-condensing)
Mounting
: DIN rail
Weight
: 80 g (2.8 oz)
PERFORMANCE in percentage of span
Accuracy
: ±0.1 % (For ‘/A1' ±0.2%)
Temp. coefficient
: ±0.015 %/°C (±0.008 %/°F) (for ‘/A1' ±0.04%/°C (±0.02%/°F))
Line voltage effect
: ±0.1 % over voltage range
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
(input to output to power to ground)
DC powered
: 2000 V AC @1 minute
AC powered
: 1500 V AC @1 minute
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
UK conformity (UKCA):
The UK legislations and designated standards are equivalent to the applicable EU directives.
(Refer to our website for more information about the legislations and designated standards.)
FRONT VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM