ES-2362 Rev.4
IT60RC
Tower Light Series
CC-Link TOWER LIGHT
(60 mm dia., 4 layers)
Functions & Features
• Lighting, blinking and buzzing are controllable with PLC.
• Bi-color lighting available in fourth layer
• Separable tension clamp terminal
MODEL: IT60RC-4[1][2][3][4][5]D[6]-[7][8]
ORDERING INFORMATION
• Code number: IT60RC-4[1][2][3][4][5]D[6]-[7][8]
Specify a code from below for each of [1] through [8].
(e.g. IT60RC-4RYGBWD1-M2/Q)
• Specify the specification for option code /Q
(e.g. /C01)
LAMP LAYERS
4
: 4 layers
[1] LAMP 1 COLOR
(1st layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
[2] LAMP 2 COLOR
(2nd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
[3] LAMP 3 COLOR
(3rd layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
[4] LAMP 4 COLOR
(4th layer from the top)
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
[5] LAMP 5 COLOR
R
: Red
Y
: Amber
G
: Green
B
: Blue
W
: White
N
: None
MOUNTING
D
: Direct mounting
[6] DESIGN TYPE
1
: Type 1
2
: Type 2 (with dummy antennae)
(refer to outline dimensions)
[7] POWER INPUT
AC Power
M2
: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[8] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
GENERAL SPECIFICATIONS
Degree of protection
: IP 65, vertical mounting only (bottom connectors excluded)
Connection
Power/Network
: Separable tension clamp terminal
Applicable wire size
: 0.2 to 1.5 mm
2
, stripped length 10 mm
Recommended solderless terminal
:
AI0,5-10WH 0.5mm
2
(Phoenix Contact)
AI0,75-10GY 0.75mm
2
(Phoenix Contact)
Housing material
: Flame-resistant resin (white)
Lens
: Flame-resistant resin (transparent)
Isolation
: Network to power input to FE1 (Functional Earth)
DIP SW Setting
: Frequency of lamp blinking and buzzing discontinuance, buzzing volume level and output at connection failed. (refer to the instruction manual)
Lamp
: Red, amber, green, blue and white LEDs
on/blinking (approx. 2 Hz, 10 Hz)
Indicator LEDs
: Power, Run, Error, SD and RD (5 LEDs) indicate the module’s operating conditions. (Refer to the insruction manual)
Buzzing
: Approx. 3.3 kHz
Interval
: continuous/intermittent (approx. 2 Hz, 10 Hz)
CC-Link COMMUNICATION
Protocol
: CC-Link V1.10
Device type
: Remote I/O station
Station No. setting
: Rotary switch; 1 – 64
Required node
: 1
Baud rate setting
: Rotary switch
156kbps, 625kbps, 2.5Mbps, 5Mbps, 10Mbps
Cable for comm. link
: Specified by Mitsubishi Electric
Terminating resistor
: Built-in (Selected with the DIP SW)
INSTALLATION
Power consumption
•
AC
: Approx. 5 VA at 100 V
Approx. 7 VA at 200 V
Approx. 8 VA at 240 V
•
DC
: Approx. 3 W
Operating temperature
: -10 to +55°C (14 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas
Mounting
: Direct mounting
Mounting direction
: Vertical
Weight
: 1.4 kg (3.1 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute
(network to power to FE1)
EXTERNAL VIEW
TERMINAL ASSIGNMENTS
EXTERNAL DIMENSIONS unit: mm
MOUNTING REQUIREMENTS unit: mm
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM