ES-9413 Rev.5
ABS3
Final Control Elements
PARAMETER GENERATOR
(with digital displays)
Functions & Features
• 1/16 DIN size
• Process input monitor display
• All parameters are programmable via the front control keys
• Field-selectable voltage or current input
• IP66 front panel (single mounting)
Typical Applications
• Various parameter settings for computers and
DCS’s
MODEL: ABS3–MM–[1][2]
ORDERING INFORMATION
• Code number: ABS3-MM-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. ABS3-MM-M2/Q)
• Specify the specification for option code /Q
(e.g. /C01/SET)
INPUT
M
: 4 – 20 mA DC (Input resistance 37 Ω)
/ 1 – 5 V DC (Input resistance ≥ 1M Ω)
OUTPUT
M
: 4 – 20 mA DC (Load resistance ≤ 550 Ω)
/ 1 – 5 V DC (Load resistance ≥ 250 kΩ)
[1] POWER INPUT
AC Power
M2
: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
R
: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
EX-FACTORY SETTING
/SET
: Preset according to the Ordering Information Sheet
(No. ESU-9413)
GENERAL SPECIFICATIONS
Construction
: Panel flush mounting; terminal access via screw terminals at the rear; terminal cover provided
Degree of protection
: IP66; applicable to the front of the panel meter with single mounted according to the specified panel cutout
Connection
: M3 screw terminals (torque 0.6 N·m)
Screw terminal
: Nickel-plated steel
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output to power
Security
: Protecting settings by inhibiting operation of parameter block 0 to 3 button
Programming
: Front membrane pad keys
Setting
:
• Scaled range
• Moving average
• Input filter time constant
• Others
DISPLAY
■
DIGITAL DISPLAYS
•
PV Display
Display
: 7-segment, 4-digit, red LED, 10 mm (.39") high
Scaling range
: -1999 to 9999
Decimal point position
: 10
–1
, 10
–2
, 10
–3
or none
Read rate
: Max. 4/sec. (0.25 sec.)
Over-range indication
: ‘UUUU’ when the input signal goes above +10 % of the scaled range or 9999;‘LLLL’ when the input signal goes below -10 % of the scaled range or -1999
•
SV Display
Display
: 7-segment, 4-digit, green LED, 10 mm (.39") high
Selectable range
: -10 to +110 % in 1 % increments
•
Status Indicators
PWR indicator
: Green LED turns on while the power is supplied.
L1 indicator
: Amber LED turns on when setting the parameter block 1.
L2 indicator
: Amber LED turns on when setting the parameter block 2.
L3 indicator
: Amber LED turns on when setting the parameter block 3.
INPUT SPECIFICATIONS
Input signal range
: -10 % - +110 %
OUTPUT SPECIFICATIONS
Output available range
: -10 % - +110 %
INSTALLATION
Power consumption
•
AC
: 4 VA at 100 V AC
5 VA at 200 V AC
6 VA at 264 V AC
•
DC
: ≤ 3 W
Operating temperature
: -5 to +55°C (23 to 131°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Mounting
: Panel flush mounting
Weight
: 130 g (0.29 lb)
PERFORMANCE in percentage of span
■
PV DISPLAY
Display
accuracy
: ±0.2 % ±1 digit of the span
Temp. coefficient
: ±0.015 %/°C (±0.008 %/°F)
Line voltage effect
: Included in the display accuracy
■
OUTPUT SIGNAL
Setpoint accuracy
: ±0.2 % of the span
Temp. coefficient
: ±0.015 %/°C (±0.008 %/°F)
Response time
: Approx. 0.5 sec. (0 – 90 %)
Line voltage effect
: Included in the setpoint accuracy
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @1 minute (input to output to power to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Installation Category II
Pollution Degree 2
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
EXTERNAL VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
PANEL CUTOUT unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM