·Some details are not shown. Please refer to specification sheets for all information.

CND

Multiplex Transmission System

ADAPTOR CONNECTOR

Functions & Features
• Simplifies wiring work between multiplex transmission units (DLA1) and 10-RACK, 15-RACK and 18-RACK signal conditioner modules

MODEL: CND–[1]

ORDERING INFORMATION
• Code number: CND-[1]
Specify a code from below for [1] 
(e.g. CND-11)

[1] CONNECTOR
(DLA1 I/O model suffix code – connected equipment)
11: G1 (Ai 32) – 10/18-Rack*
  M1 (Ao 32) – 10/18-Rack*
12: R1 (Ai 16 / Ao 16) – 10/18-Rack*
21: G1 (Ai 32) – 15-Rack*
  M1 (Ao 32) – 15-Rack*
22: R1 (Ai 16 / Ao 16) – 15-Rack*
31: A1, A2, C1, C2, C3, C4, E1, E2, G1, M1, P1, R1,
  S1 – Connector Terminal Block (CNT)*
71: C1 (Do 32) – OMRON I/O relay terminal**
  (for G7TC-OC16 output)
72: C2 (Do 32) – OMRON I/O relay terminal**
  (for G7TC-OC16 output)
81: M1 (Ao 32) – YOKOGAWA DCS card**
  VM1 x 2 (KS2 cable)
82: R1 (Ai 16 / Ao 16) – YOKOGAWA DCS card**
VM2 x 2 (KS2 cable)
83: A2 (Di 64) or C3 (Do 64) – YOKOGAWA DCS card**
  ST5 / ST6 / ST7 (KS9 cable)
84: R1 (Ai 16 / Ao 16) – YOKOGAWA DCS card**
  VM4, VM1 (KS2 cable)
86: C2 (Do 32) – YOKOGAWA DCS card**
  ST2 / ST3 (KS2 cable)
87: A1 (Di 32) – YOKOGAWA DCS card**
  ST2 / ST4 (KS2 cable)
88: E2 (Di 16 / Do 16) – YOKOGAWA DCS card**
  ST2 (KS2 cable)
89: C1 (Do 32) – YOKOGAWA DCS card**
  ST2 / ST3 (KS2 cable)
8A: A1 (Di 32) – YOKOGAWA DCS card**
  ST7 (KS9 cable)
8B: C1 (Do 32) – YOKOGAWA DCS card**
  ST6 (KS9 cable)
*FUJITSU FCN type connector
(model: FCN-36xP040-AU)
**M-System guarantees the connecting section

RELATED PRODUCTS
• Standard rack (for 10/15/18-Rack)
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS
Construction: Metal plates assembly
Material: SPCC
Coating: Melamine resin
Color: Black

INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Attached to the front of DLA1 unit
Weight
  Standard
: 450 g (0.99 lbs)
  CND-83: 250 g (0.55 lbs)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1000 V AC @ 1 minute
(I/O connector to metal housing)

CONNECTOR PIN ASSIGNMENT

DIMENSIONS unit: mm (inch)

SYSTEM CONFIGURATION EXAMPLES

MG Co., Ltd.