·Some details are not shown. Please refer to specification sheets for all information.

R10-BS1

Plug-in Remote I/O R10 Series

INSTALLATION BASE

MODEL: R10-BS1[1]

ORDERING INFORMATION
• Code number: R10-BS1[1]
Specify a code from below for [1].
  (e.g. R10-BS1/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

BASE TYPE
1: For R10M series

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

RELATED PRODUCTS
• Remote I/O R10 series

GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M2.6 screw terminals (torque 0.5 N·m)
• Connected to I/O module with connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)

INSTALLATION
Power input: Refer to the I/O module
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -10 to +55°C (14 to +131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight (when the I/O module is not mounted): 105 g (0.23 lb)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
(I/O to power to commnication to FE1)
Dielectric Strength: 1500 V AC @ 1 minute
(I/O to power to communication to FE1)

STANDARDS & APPROVALS
Conforming to related products
RoHS Directive

CONNECTION DIAGRAM

TERMINAL ASSIGNMENTS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

MOUNTING REQUIREMENTS unit: mm [inch]

MG Co., Ltd.