·Some details are not shown. Please refer to specification sheets for all information.

M5VF2

Super-mini Terminal Block Signal Conditioners M5-UNIT

SIGNAL TRANSMITTER
(high speed response 30μsec.)

Functions & Features
• Converts a DC input into an isolated DC signal
• Ultra-high speed response 30 μsec.
• High-density mounting
• Power LED
 

MODEL: M5VF2–[1][2]–R[3]

ORDERING INFORMATION
• Code number: M5VF2-[1][2]-R[3]
Specify a code from below for each [1] through [3].
  (e.g. M5VF2-4W4W-R/Q)
• Specify the specification for option code /Q
  (e.g. /C01/V01/S01)

[1] INPUT
Voltage
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

[2] OUTPUT
Voltage
4: 0 - 10 V DC (Load resistance 5000 Ω min.)
5: 0 – 5 V DC (Load resistance 2500 Ω min.)
6: 1 – 5 V DC (Load resistance 2500 Ω min.)
4W: -10 – +10 V DC (Load resistance 5000 Ω min.)
5W: -5 – +5 V DC (Load resistance 2500 Ω min.)

POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
ADJUSTMENT
/V01: Multi-turn fine adjustment
TERMINAL SCREW MATERIAL
/S01: Stainless steel

GENERAL SPECIFICATIONS
Construction: Terminal block
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Overrange output: Approx. -10 to +110 % at 1 – 5 V
Zero adjustment: -3 – +3 % (front)
Span adjustment: 97 – 103 % (front)
Power LED: Green LED turns on when the power is supplied.

INPUT SPECIFICATIONS
DC Voltage
Input resistance: 1 MΩ min.

OUTPUT SPECIFICATIONS
DC Voltage
Parallel load capacitance: ≤ 2000 pF

INSTALLATION
Power consumption
DC: ≤ 1.0 W
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 5 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 80 g (2.8 oz)

PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Frequency characteristics: 12 kHz, -3 dB
Response time: Approx. 30 µsec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute
(input or output to power to ground)
1500 V AC @1 minute (input to output)

EXTERNAL VIEW

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

M-System Co., Ltd.