·Some details are not shown. Please refer to specification sheets for all information.

R30XN16A

Remote I/O R30 Series

DISCRETE INPUT MODULE
(Di 16 points; with external excitation supply)

Functions & Features
• 16 channels for discrete input remote I/O module

MODEL: R30XN16AS[1]

ORDERING INFORMATION
• Code number: R30XN16AS[1]
Specify a code from below for [1].
  (e.g. R30XN16AS/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

TYPE
16A: Input, 16 points (external input power)

COMMUNICATION MODE
S: Single

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

GENERAL SPECIFICATIONS
Connection
 Internal bus
: Via the Installation Base (model: R30BS)
 Input: M3 separable screw terminal (torque 0.5 N·m)
 Internal power supply: Via the Installation Base (model: R30BS)
Solderless terminal: Refer to the drawing at the end of the section.
   Recommended manufacturer: Japan Solderless Terminal MFG. Co., Ltd., Nichifu Co., Ltd. 
  (Solderless terminals with insulation sleeve do not fit.)
  Applicable wire size: 0.25 to 0.75 mm2
Screw terminal: Nickel-plated steel
Isolation: Input to internal bus or internal power
Status indicators: RUN, ERR
Discrete Input Indicator LEDs: Green LED; turns on with input ON
(Refer to the instruction manual.)

INPUT SPECIFICATIONS
Module type: Discrete input, 16 points
Isolation: Optical isolator
Input resistance: Approx. 4.4 kΩ
Common: Positive or negative common (NPN/PNP) per 16 points
Rated input voltage: 24 V DC ±10 % (ripple 5 %p-p max.)
Input current: ≤ 5.5 mA per point at 24 V DC
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1.0 mA
ON delay: ≤ 0.5 msec.
OFF delay: ≤ 1.0 msec.

INSTALLATION
Current consumption: Approx. 40 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R30BS)
Weight: 150 g (0.33 lb)

PERFORMANCE
Data allocation: 1
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input to internal bus or internal power)
1500 V AC @ 1 minute (power input to FE; isolated on the power supply module)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

TERMINAL ASSIGNMENTS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

M-System Co., Ltd.