·Some details are not shown. Please refer to specification sheets for all information.

M1E-BS

2 Channel Super-mini Signal Conditioners
with Display M1E Series

INSTALLATION BASE

MODEL: M1E-BS1[1]

ORDERING INFORMATION
• Code number: M1E-BS1[1]
Specify a code from below for [1].
  (e.g. M1E-BS1/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

TYPE
1: For M1E series (Transmitter, Limit alarm) / 
    M1E-1 series (Limit alarm)

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

RELATED PRODUCTS
• 2 Channel Super-mini Signal Conditioners with Display M1E Series
• Multi-output Super-mini Signal Conditioners with Display M1E-1 Series

GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M2.6 screw terminals (torque 0.5 N·m)
• Connected to transmitter body with connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)

INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Storage temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 10 to 85 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight: Approx. 105 g (3.70 oz) without a transmitter body

PERFORMANCE
Insulation resistance:
•Transmitter:  ≥ 100 MΩ with 500 V DC
(Ch1 input to Ch2 input to Ch1 output to Ch2 output to power)
•Limit alarm: ≥ 100 MΩ with 500 V DC
(Ch1 input to Ch2 input to 1L1 or 1L2 alarm output to 1L3 or 1L4 alarm output to 2L1 or 2L2 alarm output to 2L3 or 2L4 alarm output to power)
Dielectric strength
•Transmitter: 1500 V AC @ 1 minute
(Ch1 input to Ch2 input to Ch1 output to Ch2 output to power to ground)
•Limit alarm: 1500 V AC @ 1 minute
(Ch1 input to Ch2 input to 1L1 or 1L2 alarm output to 1L3 or 1L4 alarm output to 2L1 or 2L2 alarm output to 2L3 or 2L4 alarm output to power to groung)

STANDARDS & APPROVALS
Conforming to related products

TERMINAL ASSIGNMENTS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

MOUNTING REQUIREMENTS unit: mm (inch)

MG Co., Ltd.