·Some details are not shown. Please refer to specification sheets for all information.

MD7G

Lightning Surge Protectors for
Electronics Equipment M-RESTER

TERMINAL BLOCK FOR GROUNDING
(ultra-slim)

Functions & Features
• Relaying terminal block in order to connect wires to the DIN rail for grounding
• Used to ground the shield wire or to cross wire the devices protected by the surge protector

MODEL: MD7G-G[1]

ORDERING INFORMATION
• Code number: MD7G-G[1]
 Specify a code from below for [1].
  (e.g. MD7G-G/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

GROUNDING
G: Grounding

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating

RELATED PRODUCTS
•Lightning surge protector for strain gauge (model: MD7LC)

GENERAL SPECIFICATIONS
Construction: Slim-sized front terminal structure
Degree of protection: IP20
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm2,  stripped length: 8 mm
Grounding: DIN Rail
Housing material: Flame-resistant resin (black)

INSTALLATION
Operating temperature: -25 to +85°C (-13 to +185°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight: 70 g (2.5 oz)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CIRCUIT DIAGRAM

M-System Co., Ltd.