·Some details are not shown. Please refer to specification sheets for all information.

R30BS

Remote I/O R30 Series

INSTALLATION BASE

Functions & Features
· Installation base dedicated to Remote I/O R30 Series, Paperless Recorder TR30 Series and Field Logger DL30 Series

MODEL: R30BS[1][2]

ORDERING INFORMATION
• Code number: R30BS[1][2]
Specify a code from below for each [1] and [2].
  (e.g. R30BS16/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] NUMBER OF SLOTS
00: 0 slot
02: 2 slots
04: 4 slots
08: 8 slots
12: 12 slots
16: 16 slots

[2] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

GENERAL SPECIFICATIONS
Capacity:
R30BS00: I/O module, 0 slot (Model: TR30, DL30 single use)
R30BS02: I/O module, 2 slots
R30BS04: I/O module, 4 slots
R30BS08: I/O module, 8 slots
R30BS12: I/O module, 12 slots
R30BS16: I/O module, 16 slots

INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
Weight (Without modules mounted)
R30BS00: approx. 50 g (1.76 oz)
R30BS02: approx. 100 g (0.22 lb)
R30BS04: approx. 160 g (0.35 lb)
R30BS08: approx. 260 g (0.57 lb)
R30BS12: approx. 360 g (0.79 lb)
R30BS16: approx. 470 g (1.04 lb)

PERFORMANCE
Dielectric strength: 1500 V AC @ 1 minute (Internal power or internal bus to FE; isolated on the power supply module)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW
Mount the power supply module and network module on the dedicated slots (PWR and COM), and do not mount on I/O slots.  PWR slot is on the left end and COM slot is on the immediate right of PWR slot.  The I/O slots are numbered in the ascending order starting from the one on the immediate right of the network module (slot 1, slot 2...).
For model: TR30 or DL30, mount it on the PWR and COM slot.

DIMENSIONS unit: mm (inch)

MOUNTING REQUIREMENTS unit: mm (inch)

M-System Co., Ltd.