·Some details are not shown. Please refer to specification sheets for all information.

B5TS

Super-mini Two-wire Terminal Block
Signal Conditioners B5-UNIT

THERMOCOUPLE TRANSMITTER

Functions & Features
• Accepts direct input from a thermocouple and provides an isolated 4 – 20 mA DC signal
• Linearization and burnout
• Cold junction compensation
• Monitor terminals
• High-density mounting
• Power LED

MODEL: B5TS–[1][2]

ORDERING INFORMATION
• Code number: B5TS-[1][2]
Specify a code from below for each [1] and [2].
• Code number (e.g. B5TS-1/K/BL/Q)
• Temperature range (e.g. 0 – 800°C)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] INPUT THERMOCOUPLE
1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
7: R (Usable range -50 to +1760°C, -58 to +3200°F)
8: S (Usable range -50 to +1760°C, -58 to +3200°F)
N: N (Usable range -270 to +1300°C, -454 to +2372°F)
0: Specify

[2] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Burnout
blank: Upscale burnout
/BL: Downscale burnout
/BN: No burnout
Other Options
blank: none
/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

GENERAL SPECIFICATIONS
Construction: Terminal block
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output
Zero adjustment: -1 to +1 % (front)
Span adjustment: 98 to 102 % (front)
Burnout: Upscale standard; downscale or no burnout optional
Linearization: Standard
Cold junction compensation: CJC sensor attached to the input terminals (B thermocouple is without CJC as standard)
Power LED: Orange light turns on when the power is supplied.

INPUT SPECIFICATIONS
Minimum span: 3 mV
Input resistance: 20 kΩ min.
Burnout sensing: 0.1 μA

Lower temperature range & span (in °C)
(PR): Lower range 0 to 880°C;  min. span 370°C
K (CA): Lower range -270 to +1200°C;  min. span 75°C
E (CRC): Lower range -270 to +750°C;  min. span 50°C
J (IC): Lower range -210 to +800°C;  min. span 60°C
T (CC): Lower range -270 to +325°C;  min. span 75°C
B (RH): Lower range 0 to 750°C;  min. span 780°C
R: Lower range -50 to +550°C;  min. span 360°C
S: Lower range -50 to +550°C;  min. span 380°C
N: Lower range -270 to +1100°C;  min. span 110°C

Lower temperature range & span (in °F)
(PR)
: Lower range 32 to 1616°F;  min. span 670°F
K (CA): Lower range -454 to +2192°F;  min. span 140°F
E (CRC): Lower range -454 to +1382°F;  min. span 90°F
J (IC): Lower range -346 to +1472°F;  min. span 110°F
T (CC): Lower range -454 to +617°F;  min. span 140°F
B (RH): Lower range 32 to 1382°F;  min. span 1450°F
R: Lower range -58 to +1022°F;  min. span 680°F
S: Lower range -58 to +1022°F;  min. span 700°F
N: Lower range -454 to +2012°F;  min. span 200°F

Note: The described accuracy may be partially not satisfied when the temperature ranges below 0°C. Consult M-System.

OUTPUT SPECIFICATIONS
Output: 4 – 20 mA DC
Load resistance vs. supply voltage:
Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A)     (including leadwire resistance)

INSTALLATION
Supply voltage: 12 – 28 V DC
Operating temperature: -40 to +80°C (-40 to +176°F)
Operating humidity: 0 to 90 %RH (non-condensing)
Mounting: DIN rail
Weight: 60 g (2.1 oz)

PERFORMANCE in percentage of span
Accuracy (whichever is greater)
  K, E, J: ±0.1 % of FS or ±0.2°C (±0.36°F)
  T, N: ±0.2 % of FS or ±0.2°C (±0.36°F)
  PR, R, S: ±0.3 % of FS (over 400°C or 750°F)
  B: ±0.3 % of FS (over 770°C or 1420°F)
Cold junction compensation error
  K: ±1°C max. at 0 – 80°C
    0.2°C @25°C+0.035°C/°C at -40 – 0°C
    (±1.8°F max. at 32 – 176°F
    0.36°F @77°F+0.035°F/°F at -40 – +32°F)
  J: ±2°C max. at 0 – 80°C
    0.2°C @25°C+0.06°C/°C at -40 – 0°C
    (±3.6°F max. at 32 – 176°F
    0.36°F @77°F+0.06°F/°F at -40 – +32°F)
  E, T, N: ±3°C max. at 0 – 80°C
    0.2°C @25°C+0.14°C/°C at -40 – 0°C
    (±5.4°F max. at 32 – 176°F
    0.36°F @77°F+0.14°F/°F at -40 – +32°F)
  PR, R, S: ±4°C max. at 0 – 80°C
    0.2°C @25°C+0.25°C/°C at -40 – 0°C
    (±7.2°F max. at 32 – 176°F
    0.36°F @77°F+0.25°F/°F at -40 – +32°F)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Burnout response: ≤ 10 sec.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute
(input to output to ground)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

DIMENSIONS unit: mm (inch)

TERMINAL ASSIGNMENTS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

M-System Co., Ltd.