ES-8007-L Rev.1

R7F4DD-DC16B-H

Remote I/O R7F4D Series

DeviceNet® I/O MODULE

(PNP discrete output, 16 points, e-CON connector)
Functions & Features
• Converts discrete I/O data to the open network fieldbus (DeviceNet)
 
DeviceNet is registered trademark of ODVA.

MODEL: R7F4DD-DC16B-H[1]

ORDERING INFORMATION

• Code number: R7F4DD-DC16B-H[1]
Specify a code from below for [1].
  (e.g. R7F4DD-DC16B-H/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

I/O TYPE

DC16B: PNP discrete output, 16 points

TERMINAL BLOCK

H: Euro type connector terminal for
    communication/power supply
    e-CON connector for output

[1] OPTIONS

blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

RELATED PRODUCTS

• PC Configurator cable (model: MCN-CON or COP-US)
• PC configurator software (model: R7CFG)
• EDS file
The EDS files and configurator software are downloadable at our web site.

GENERAL SPECIFICATIONS

Connection
  Communication/power supply, exc. supply

  Euro type connector terminal
  Output: e-CON connector
Housing material: Flame-resistant resin (gray)
Isolation: Output or exc. supply to communication/power supply
Discrete output status indicator LED: Green LED; turns on with output ON
Configurator connection: 2.5 dia. miniature jack

DeviceNet COMMUNICATION

Communication/power supply cable: Approved for DeviceNet
Baud rate setting: 125 kbps, 250 kbps, 500 kbps, auto-tracking (DIP switch, factory default: auto-tracking)
(Refer to the instruction manual.)
Node address setting: 0 - 63 (rotary switch, factory default: 00)
(Refer to the instruction manual.)
Status indicator LEDs: MS, NS
(Refer to the instruction manual for details.)

OUTPUT SPECIFICATIONS

Common: Positive common (PNP) per 16 points
Number of output: 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Rated load voltage: 24 V DC ±10 %, ripple 5 %p-p max.,
≤ 1 A (including discrete output load charge); rated current
8 A
Rated output current: 0.1 A per point, 1.6 A per common
Residual voltage: ≤ 1.2 V
Leakage current: ≤ 0.1 mA
ON delay: ≤ 0.2 msec.
OFF delay: ≤ 0.5 msec.
With shortcircuit protection
With overheat protection
(When driving an inductive load, connect a diode in parallel with the load.)

INSTALLATION

Supply voltage: 11 – 25 V DC (supplied from communication/power supply terminal block)
Current consumption:
Approx. 50 mA @ 24 V DC 
Approx. 60 mA @ 11 V DC
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight: 120 g (0.26 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(output or exc. supply to communication/power supply)

STANDARDS & APPROVALS

EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive

EXTERNAL VIEW

TERMINAL ASSIGNMENTS

■COMMUNICATION/POWER SUPPLY TERMINAL ASSIGNMENT
■EXC. SUPPLY TERMINAL ASSIGNMENT
■ OUTPUT TERMINAL ASSIGNMENT

DATA ALLOCATION

I/O DATA DESCRIPTIONS

TRANSMISSION DATA DESCRIPTIONS

EXTERNAL DIMENSIONS unit: mm [inch]

MOUNTING REQUIREMENTS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM