ES-8380 Rev.16

R3-DA16A

Remote I/O R3 Series

DISCRETE INPUT MODULE

(Di 16 points; with external excitation supply)

MODEL: R3–DA16A[1][2]

ORDERING INFORMATION

• Code number: R3-DA16A[1][2]
Specify a code from below for each of [1] and [2].
  (e.g. R3-DA16AW/110/CE/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

NO. OF CHANNELS

16: 16

EXCITATION SUPPLY

A: External excitation

[1] COMMUNICATION MODE

S: Single
W: Dual

[2] OPTIONS (multiple selections)

External Excitation
blank: 24 V DC
/12: 12 V DC
/5: 5 V DC
/48: 48 V DC
/110: 110 V DC
Standards & Approvals
blank: Without CE
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to our web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection
 Internal bus
: Via the Installation Base (model: R3-BSx)
 Input: M3 separable screw terminal (torque 0.5 N·m)
 Internal power: Via the Installation Base (model: R3-BSx)
Screw terminal: Nickel-plated steel
Isolation: Input to internal bus or internal power
Excitation monitor: Selectable with side DIP switch; ON/OFF setting available
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Bi-color (red/green) LED;
Red with excitation abnormality;
Green in normal operating conditions.
Input status indicator: Red LED; turns on with the input ON.
Read rate: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec. selectable with DIP SW

INPUT SPECIFICATIONS

Number of input: 16 points
Isolation: Optical isolator
Input resistance:
Approx. 4.4 kΩ (24 V DC)
Approx. 2.2 kΩ (12 V DC)
Approx. 800 Ω (5 V DC)
Approx. 22 kΩ (48 V DC)
Approx. 54 kΩ (110 V DC)
Common: Positive or negative common (NPN/PNP) per 16 points
Rated input voltage
24V exc.: 24 V DC +10/-15 % (ripple 5 %p-p max.)
12V exc.: 12 V DC ±10 % (ripple 5 %p-p max.)
5V exc.: 5 V DC ±10 % (ripple 5 %p-p max.)
48V exc.: 48 V DC ±10 % (ripple 5 %p-p max.)
110V exc.: 110 V DC (90 - 121 V DC, ripple 5 %p-p max.)
Rated input current:
Approx. 5 mA (24 V DC, 12 V DC, 5V DC)
Approx. 2 mA (48 V DC, 110 V DC)
ON voltage/current:
≥ 11 V, ≥ 2.5 mA (24 V DC)
≥ 5.5 V, ≥ 2.5 mA (12 V DC)
≥ 3V, ≥ 2.5 mA (5 V DC)
≥ 35V, ≥ 1.5 mA (48 V DC)
≥ 85V, ≥ 1.5 mA (110 V DC)
OFF voltage/current:
≤ 6 V, ≤ 1.3 mA (24 V DC)
≤ 3 V, ≤ 1.3 mA (12 V DC)
≤ 1 V, ≤ 1.3 mA (5 V DC)
≤ 20 V, ≤ 1.0 mA (48 V DC)
≤ 50 V, ≤ 1.0 mA (110 V DC)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)

PERFORMANCE

Data allocation: 1
Current consumption: 80 mA
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(input to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the power supply module)

STANDARDS & APPROVALS

EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
Low Voltage Directive 
(External excitation 110 V DC only)
  EN 61010-1, EN 61010-2-201
  Installation Category I (contact input) 
  Pollution Degree 2
 Input to internal bus or internal power: Reinforced insulation (150 V) 
RoHS Directive

FUNCTIONS

Excitation Monitor ON
The input is held at the last status when the loss of excitation is detected. The excitation must be connected across the terminal 9 (19) and 10 (20).
Excitation Monitor OFF
All input signals are turned off when the loss of excitation is detected.

EXTERNAL VIEW

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM