·Some details are not shown. Please refer to specification sheets for all information.

18YS

Rack-mounted DCS Signal Conditioners 18-RACK

OUTPUT ISOLATOR

Functions & Features
• Converting a 1 – 5 V DC input into an isolated standard process signal
• Input from the Standard Rack connector can be monitored at the front terminals
Typical Applications
• Isolation between control room and field instrumentation

MODEL: 18YS–6[1]–R

ORDERING INFORMATION
• Code number: 18YS-6[1]-R
Specify a code from below for [1]
(e.g. 18YS-66-R)

INPUT
Voltage
6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[1] OUTPUT
Current
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Voltage
6: 1 – 5 V DC (Load resistance 500 Ω min.)

POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw terminals on the front and connector on the rear; terminal cover provided
Connection
  Input: Connector
  Input monitor: M3.5 screw terminals (torque 0.8 N·m)
  Output: M3.5 screw terminals (torque 0.8 N·m)
  Power input: Supplied from connector
Screw terminal: Nickel-plated steel
Isolation: Input to output to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)

OUTPUT SPECIFICATIONS
The output goes below 0 % when the input is open.

INSTALLATION
Power consumption
•DC:
Approx. 30 mA with voltage output
Approx. 50 mA with current output
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 18BXx or 18KBXx
Weight: 150 g (0.33 lbs)

PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(output to input or power)
500 V AC @ 1 minute (input to power)
1500 V AC @ 1 minute
(input or output or power to ground)

DIMENSIONS unit: mm (inch)

TERMINAL ASSIGNMENTS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

MG Co., Ltd.