ES-5017 Rev.8
M2VV
Super-mini Signal Conditioners Mini-M Series
VOLTAGE DIVIDER
Functions & Features
• Steps down a voltage too high to be input to a general transmitter
• Divided to 1/1000 or by a specified ratio
MODEL: M2VV-[1][2]
ORDERING INFORMATION
• Code number: M2VV-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. M2VV-1/Q)
• Special ratio (e.g. 1/300)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[1] DIVIDING RATIO
1
: 1/1000
0
: Specify
[2] OPTIONS
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
/C04
: Polyolefin coating
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Construction
: Plug-in
Connection
: M3 screw terminals (torque 0.8 N·m)
Screw terminal
: Chromated steel (standard) or stainless steel
Housing material
: Flame-resistant resin (black)
INPUT & OUTPUT
Dividing ratio
: 1/300 – 1/1000
Input voltage
: Any specific DC voltage value up to ±1200 V
Input resistance
: Approx. 1.1 MΩ
Output voltage
: Input Voltage × Dividing Ratio
Output resistance
: Approx. 1.1 kΩ with 1/1000 ratio;
Output Resistance [kΩ] ≈ Dividing Ratio × 1100
INSTALLATION
Operating temperature
: -5 to +60°C (23 to 140°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface or DIN rail
(Multiple installation bases can not be used.)
Weight
: 150 g (0.33 lb)
PERFORMANCE in percentage of dividing ratio
Accuracy
: ±0.2 %
Temp. coefficient
: ±0.005 %/°C (±0.003 %/°F)
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @1 minute (input or output to ground)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM