ES-3574 Rev.12
KMT
Plug-in Signal Conditioners K-UNIT
CONTACT ISOLATOR
Functions & Features
• Accepting one contact signal and providing two outputs
• Input circuit containing a constant current source allows large leadwire resistance up to 3 kΩ
• Relay contact or open collector outputs
• High-density mounting
MODEL: KMT–[1]–[2][3]
ORDERING INFORMATION
• Code number: KMT-[1]-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. KMT-1-B/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
INPUT
Dry contact
[1] OUTPUT
1
: Relay contact
2
: Open collector
[2] POWER INPUT
AC Power
B
: 100 V AC
C
: 110 V AC
D
: 115 V AC
F
: 120 V AC
G
: 200 V AC
H
: 220 V AC
J
: 240 V AC
DC Power
S
: 12 V DC
R
: 24 V DC
[3] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
TERMINAL SCREW MATERIAL
/S01
: Stainless steel
GENERAL SPECIFICATIONS
Construction
: Plug-in
Connection
: M3.5 screw terminals
Screw terminal
: Chromated steel (standard) or stainless steel
Housing material
: Flame-resistant resin (black)
Isolation
: Input to output 1 to output 2 to power
Front LEDs
: Red LED turns on when the output ON.
Green LED turns on when the output OFF.
INPUT SPECIFICATIONS
■
Dry contact
Sensing:
Approx. 28 V DC @5 mA
ON/OFF level:
≤ 3 kΩ for ON; ≥ 30 kΩ for OFF
OUTPUT SPECIFICATIONS
■
Open Collector
: 24 V DC @100 mA
Maximum frequency
: 40 Hz
Saturation voltage
: 1.8 V DC
■
Relay Contact:
100 V AC @5 A (cos ø = 1)
24 V DC @5 A (resistive load)
Electrical life:
10
5
cycles (rate 30 cycles/min.)
Maximum switching voltage:
380 V AC or 125 V DC
Maximum switching power:
500 VA or 120 W
Minimum load:
5 V DC @10 mA
Mechanical life:
5 × 10
7
cycles
Maximum frequency:
1 Hz
INSTALLATION
Power input
•
AC
: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 2 VA
•
DC
: Operational voltage range: rating ±10 %
ripple 10 %p-p max., approx. 1.5 W (60 mA at 24 V)
Operating temperature
: -5 to +55°C (23 to 131°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: Surface or DIN rail
Weight
: 400 g (0.88 lb)
PERFORMANCE
Response time
Relay contact
: ≤ 10 msec.
Open collector
: ≤ 10 msec.
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1000 V AC @1 minute
(input to output 1 to output 2 to power)
2000 V AC @1 minute
(input or output 1 or output 2 or power to ground)
EXTERNAL VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM