ES-7513 Rev.11
B3FV
Space-saving Two-wire Signal
Conditioners B3-UNIT
SIGNAL TRANSMITTER
(field-configurable)
Functions & Features
• Converts a DC input into an isolated 4 – 20 mA DC signal
• DIP switch configurable input range
• Monitor terminals
• High-density mounting
MODEL: B3FV[1]
ORDERING INFORMATION
• Code number: B3FV[1]
Specify a code from below for [1].
(e.g. B3FV/UL/Q)
• Input range (e.g. 0 – 10 V DC)
• If you need the transmitter to be calibrated to a specific range, please specify when ordering. Non-specified orders will be shipped at default factory setting (4 – 20 mA input)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS (multiple selections)
Standards & Approvals
blank
: CE marking
/UL
: UL approval, CE marking
Other Options
blank
: none
/Q
: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to our web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating (UL not available)
GENERAL SPECIFICATIONS
Construction
: Small-sized front terminal structure
Connection
: Euro type connector terminal
(applicable wire size: 0.2 to 2.5 mm
2
, stripped length 8 mm)
Housing material
: Flame-resistant resin (gray)
Isolation
: Input to output
Configuration
: DIP switch
Setting
:
• Input Type
• Input Range
• Others
Refer to the instruction manual for details.
INPUT SPECIFICATIONS
■
DC Current
: Input resistor incorporated
Input resistance
: 250 Ω (4 – 20 mA)
Usable range
:
Max. range
: -30 to +30 mA DC
Span
: Min. 16 μA, Max. 60 mA
Offset
: -100 to +80 % of the selected range
■
DC Voltage
•Input resistance
Span 4 mV – 3 V
: ≥ 1 MΩ
(≥ 40 kΩ with no supply voltage)
Span ≥ 3 V
: ≥ 1 MΩ
•Usable range
:
Max. range
: -100 to +100 V DC
Span
: Min. 4m V, Max. 100 V
Offset
: -100 to +80 % of the selected range
(Max. voltage across the input terminals:
70 V for conform with EU Directive; 60 V for UL approval)
OUTPUT SPECIFICATIONS
Output
: 4 – 20 mA DC
Load resistance vs. supply voltage:
Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance)
INSTALLATION
Supply voltage
: 12 – 45 V DC
Operating temperature
:
-40 to +85°C (-40 to +185°F)
Max. 55°C (131°F) for UL approval
Operating humidity
: 0 to 95 %RH (non-condensing)
Mounting
: DIN rail
Weight
: 80 g (2.8 oz)
PERFORMANCE in percentage of span
Accuracy
: ±0.1 %
Temp. coefficient
: ±0.02 %/°C (±0.01 %/°F)
Response time
: ≤ 0.5 sec. (0 – 90 %)
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 2000 V AC @1 minute
(input to output to ground)
STANDARDS & APPROVALS
EU conformity
:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
Approval
:
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.1010-1)
EXTERNAL VIEW
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM