ES-4245 Rev.8
6FN
Field-mounted Two-wire Signal Conditioners 6-UNIT
SQUARE ROOT EXTRACTOR
Functions & Features
• Providing a 4 – 20 mA DC signal proportional to the root of input signal
• Low-end cutout
• Rugged enclosure
Typical Applications
• Converting differential pressure to flow
MODEL: 6FN-A
ORDERING INFORMATION
• Code number: 6FN-A
• Mounting adapter (e.g. surface mounting adapter plate, model: A-01)
Note: When a mounting adapter is required, specify mounting adapter. Not included without specifying.
INPUT
A
: 4 – 20 mA DC
RELATED PRODUCTS
• Outdoor enclosure (model: 6BX-E)
PACKAGE INCLUDES...
• Mounting adapter
surface mounting adapter plate (model: A-01)
Spring clip (model: A-02)
DIN rail mounting plate (model: A-31)
Note: When a mounting adapter is required, specify mounting adapter. Not included without specifying.
When using in combination with outdoor enclosure (model: 6BX-E), use a spring clip (model: A-02).
GENERAL SPECIFICATIONS
Connection
: M3 screw terminals (torque 0.6 N·m)
Screw terminal
: Nickel-plated steel
Housing material
: Diecast aluminum
Zero adjustment
: 0 – 5 % (behind the access cover)
Span adjustment
: 100 – 103 % (behind the access cover)
Low-end cutout
: Approx. 10 % (output); curve characteristics shown in the figure below
OUTPUT SPECIFICATIONS
Output
: 4 – 20 mA DC
Voltage drop per loop
: ≤ 5 V
INSTALLATION
Supply voltage
: Voltage required by differential pressure transmitter + 5 V
Operating temperature
: -5 to +70°C (23 to 158°F)
Operating humidity
: 30 to 90 %RH (non-condensing)
Mounting
: DIN rail with mounting plate A-31; surface mounting with adapter plate A-01; spring clip A-02 for 3-inch hub
Weight
: 220 g (0.49 lb)
PERFORMANCE in percentage of span
Accuracy
: ±0.2 % (input 1 – 100 %)
Temp. coefficient
: ±0.03 %/°C (±0.02 %/°F)
Response time
: ≤ 0.5 sec. (0 – 90 %)
Ripple
: 0.1 %p-p max.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM