ES-4429 Rev.1

20VS5-213

Hybrid IC Isolation Amplifiers 20 Series

ISOLATION AMPLIFIER

(high-accuracy, input isolation, external synchronous)
Functions & Features
• Being used for printed wiring board installation
• Up to 1500 V isolation between input to output or power input
• High-linearity
• Small installation area in printed wiring board
• Gain adjustable range, × 1 to × 10
• Powered with external Clock Generator (model: 20VS5-2)
Typical Applications
• Isolating the field and input circuit of microprocessor to reduce noise from field
• Available for manufacturers of small-lot products to omit the development of isolation circuit
• Using external Clock Generator to eliminate the "beat frequency" interference at multi-channel outputs.
 

MODEL: 20VS5-213

ORDERING INFORMATION

 • Code number: 20VS5-213
INPUT RANGE -10 – +10 V DC
OUTPUT RANGE -10 – +10 V DC

POWER INPUT

210 kHz (clock input)
0 - 15 V, square wave, duty cycle: 50 %
Supplied with external Clock Generator (model: 20VS5-2)

RELATED PRODUCTS

• Clock generator (model: 20VS5-2)

GENERAL SPECIFICATIONS

Construction: Hybrid IC
Housing material: Flame-resistant resin (black)
Isolation: Input to output or power

INPUT SPECIFICATIONS

DC Voltage
Input
: -10 – +10 V DC
Input resistance: ≥ 1 MΩ  (10 kΩ in power failure)
Overload input voltage: ±30 V DC continuous
Input offset voltage: ±10 mV
Input bias current: 0.5 nA TYP. (@25°C)

OUTPUT SPECIFICATIONS

DC Voltage: -10 – +10 V DC
Load resistance: ≥ 5 kΩ
Output impedance: ≤ 1 Ω

REFERENCE VOLTAGE SOURCE

Output voltage: ±15 V DC TYP.
Load current: ≤ 2 mA

INSTALLATION

Power input
0 - 15 V ±5 %, square wave, duty cycle: 50 % ±5 %, 210 kHz ±5 %; approx. 15 mA
Operating temperature: -10 to +70°C (14 to 158°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Soldering to the printed wiring board
Weight: 10 g (0.35 oz)

PERFORMANCE in percentage of span

Unless otherwise specified, G = 1.
Linearity: ±0.005 % TYP. (±0.01 % max.)
Temp. coefficient: 40 ppm/°C
Frequency characteristics: Approx. 1 kHz, -3 dB
Response time: ≤ 450 μsec. (0 – 90 %)
Conversion gain: ×0.97 ±5 %
Gain adjustable range: × 1 to × 10
Line voltage effect: ±0.05 %
(over voltage, duty cycle and frequency range)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute (input or reference voltage source to output or power)
CMRR: ≥ 110 dB (500 V AC  50/60 Hz)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

APPLICATION EXAMPLE

10 kΩ ≤ (R1 + R2) ≤ 200 kΩ