·Some details are not shown. Please refer to specification sheets for all information.
R30NECT1
Remote I/O R30 Series
NETWORK MODULE
(EtherCAT)
Functions & Features
• Free combination of analog and discrete I/O
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
MODEL: R30NECT1[1]
ORDERING INFORMATION
• Code number: R30NECT1[1]
Specify a code from below for [1].
(e.g. R30NECT1/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS
blank
: none
/Q
: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01
: Silicone coating
/C02
: Polyurethane coating
/C03
: Rubber coating
CAUTION
Installing R3 series I/O module by using installation base for R3 I/O module extension use (model: R30EBS) is available with firmware version 1.4.x or later.
The internal bus communication period for R3 series I/O modules installed in R30EBS is as follows.
Internal bus communication period = 6 msec. x number of I/O module + 10 msec. (Data update period of main CPU)
Example: Four R3 series I/O modules
6 msec. x 4 + 10 msec. = 34 msec.
Even R30EBS is installed, the internal bus communication period of R30 series remains approx. 1 msec.
GENERAL SPECIFICATIONS
Connection
EtherCAT
: RJ-45 connector
Internal bus
: Via the Installation Base (model: R30BS)
I
nternal power
: Via the Installation Base (model: R30BS)
Isolation
: EtherCAT to internal bus or internal power
Internal communication bus read rate:
Approx. 1 msec.
Status indicators
: PWR, RUN, ERR, L/A IN, L/A OUT
EtherCAT COMMUNICATION
Standard
: IEEE 802.3u
Transmission type
: 100BASE-TX
Transmission speed
: Full-duplex 100 Mbps
Transmission media
: 100BASE-TX (STP cable; Category 5e)
Maximum segment length
: 100 meters
Fixed address:
Set with rotary switches
(The master must support MDP.)
INSTALLATION
Current consumption:
110 mA
Operating temperature
: -10 to +55°C (14 to 131°F)
Storage temperature
: -20 to +65°C (-4 to +149°F)
Operating humidity
: 10 to 90 %RH (non-condensing)
Atmosphere
: No corrosive gas or heavy dust
Mounting
: Installation Base (model: R30BS)
Weight
: 110 g (0.24 lb)
PERFORMANCE
Insulation resistance
: ≥ 100 MΩ with 500 V DC
Dielectric strength
: 1500 V AC @ 1 minute (EtherCAT to internal bus or internal power)
1500 V AC @ 1 minute (power input to FE; isolated on the power supply module)
EXTERNAL VIEW
DIMENSIONS unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
MG Co., Ltd.