·Some details are not shown. Please refer to specification sheets for all information.

R8-NECT1

Remote I/O R8 Series

POWER/NETWORK MODULE
(EtherCAT)

Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.

MODEL: R8–NECT1–R

ORDERING INFORMATION
• Code number: R8-NECT1-R

MODULE TYPE
NECT1: EtherCAT

POWER INPUT
DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)

PACKAGE INCLUDES...
• Protective cover

GENERAL SPECIFICATIONS
Connection
Power input or excitation supply: Tension clamp (Front Twin connection)
  Applicable wire size: 0.2 - 2.5 mm2
  Stripped length: 10 mm
EtherCAT: RJ-45 connector
Internal bus or internal power or excitation supply: Via connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: EtherCAT to internal bus or internal power or power input to excitation supply to FE1
Status indicators: Power, RUN, ERR, L/A IN, L/A OUT
Communication failure detection time: 100 msec. (fixed)
(Time between LAN failure and operation of I/O module at communication failure)

EtherCAT COMMUNICATION
Standard: IEEE 802.3u
Transmission type: 100BASE-TX
Transmission speed: Full-duplex 100 Mbps
Transmission media: 100BASE-TX (STP cable; Category 5e)
Maximum segment length: 100 meters
Fixed address: Set with rotary switches
(The master must support MDP.)

INSTALLATION
Power consumption
DC: Approx. 12 W 24 V DC (@ output current 1.6 A)
Internal power
DC: 5 V DC
Operational current: 1.6 A
Excitation supply output
DC: 24 V DC ±10 %
Operational current: 10 A
 (Power output current consumption must be under 10 A)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 180 g (0.40 lb)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(EthrtCAT to internal bus or internal power or power input to excitation supply to FE1)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

CONNECTION DIAGRAMS

DIMENSIONS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal. 

MG Co., Ltd.